| Storage Temperature | -40 ~ 85 degrees C |
|---|---|
| Operating Temperature | -40 ~ 75 degrees C |
| Standards Compliance | IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3x Flow Control and Back Pressure IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus |
| Stability Testing | IEC 60068-2-32 (free fall) IEC 60068-2-27 (shock) IEC 60068-2-6 (vibration) |
| Regulatory Compliance | FCC Part 15 Class A, CE |
| Max. Number of Class 4 PDs | 4 |
| Max. Number of Class 3 PDs | 4 |
| Max. Number of Class 2 PDs | 4 |
| PoE Power Budget (max.) | 60W @12V DC input 90W @24V DC input 120W @48V DC input |
| PoE Power Output | Per port 54V DC, max. 36 watts |
| Power Pin Assignment | 1/2 (+), 3/6 (-) |
| PoE Power Supply Type | End-span |
| PoE standards | IEEE 802.3at Power over Ethernet Plus/PSE |
| Installation | DIN-rail kit and wall-mount kit |
| Enclosure | IP40 metal case |
| ESD Protection | 5KV DC |
| Weight | 598g |
| Dimensions ( W x D x H ) | 50 x 85.1 x 135 mm |
| Power Requirements | 12~48V DC, 7A (max.) |
| Alarm | One relay output for power failure. Alarm relay current carry ability: 1A @ 24V AC |
| Connector | Removable 6-pin terminal block Pin 1/2 for Power 1 Pin 3/4 for power fault alarm Pin 5/6 for Power 2 |
| LED Indicators | 3 x LED for System and Power: Green: DC Power 1 Green: DC Power 2 Red: Power Fault Alarm 2 x LED for PoE Copper Port (Port-1~Port-4): Green: LNK/ACT (10/100Mbps) Orange: PoE-in-Use 1 x LED for 10/1 |
| Jumbo Frame | 10 Kbytes |
| Flow Control | IEEE 802.3x pause frame for full-duplex Back pressure for half-duplex |
| MAC Address Table | 2K entries |
| Switch Fabric | 1Gbps/non-blocking |